UniBeam - Heavy Duty Curtain and Scenery Track

Overview

UniBeam is an aluminium extruded black anodised track section. The external dimensions are the same as the Triple E UniTrack system. The standard stocked length for UniBeam is 6.1m (20') and is rigid enough to be used as a suspension beam. It can be curved to a minimum radius of 2m (6'6") and uses the same component range as UniTrack system, however UniBeam track sections incorporate a tee slot in its upper and lower webs that accept standard channel nuts.

Specification

Dimensionally identical to UniTrack, UniBeam shares many common components. The track is available in 6.1m (20') lengths and can be pre-rolled to a minimum radius of 2m (6'6"). Steel plates and grub screws are used to join and align separate track sections. The symmetrical design allows it to be used either way up, and the continuous top slot allows the use of all UniTrack suspension fittings into a standard M12 channel nuts held captive within the slot. Precision ball raced runners and scenery carriers as well as nylon sheaved pulley blocks are used for UniBeam from the UniTrack range. With the addition of the TracDrive motor it can become a fully motorised system.

Image Gallery

Click the image to view a larger version of it and the gallery of 2 images available.

UniBeam 80m wide x 15m drop installed at Puy de Fou, France
UniBeam 80m wide x 15m drop installed at Puy de Fou, France

UniBeam installation
UniBeam installation



Product Information PDF's

Components

Click product images for descriptions.

Image ID Name
The hand TracDrive is a simple compact hand winch designed to operate corded tracks where hand pulling is not suitable. It can be retro fitted to any system and comprises of a rectangular steel back plate with 13mm holes in each corner to accept any wall fixings. The winch is roped up in a similar way to a TracDrive motor unit and the front plate carries the support bearing for the fold flat winding handle. The HTDF can also be mounted on a Unistrut frame which is usually bolted or screwed to the floor. All metal work is finished black.HTDFHTDF HAND TRACDRIVE FLOOR MOUNTED
The hand TracDrive is a simple compact hand winch designed to operate corded tracks where hand pulling is not suitable. It can be retro fitted to any system and comprises of a rectangular steel back plate with 13mm holes in each corner to accept any wall fixings. The winch is roped up in a similar way to a TracDrive motor unit and the front plate carries the support bearing for the fold flat winding handle. The HTDF can also be mounted on a Unistrut frame which is usually bolted or screwed to the floor. All metal work is finished black.
HTDWHTDW HAND TRACDRIVE WALL MOUNTED
Motor drive unit for all corded tracks incorporating control with open/close and stop functions. Variable speed. 230V supply. Maximum curtain weight 300Kg straight track, 200Kg curved track.TDRIVETDRIVE
The TRA06 twin wheeled carrier or trolley is used on straight tracks to attach and support a curtain or scenic cloth. They are usually spaced at 300mm centres along the top of the curtain or cloth and each is capable of supporting a safe working load of 25Kg.

Two flanged ball raced polyurethane wheels are attached to the body of the carrier which is moulded from a metal replacement polymer. Curtain hooks are attached to the runner body via a built-in swivelling loop and rubber strips form resilient impact buffers to reduce the noise caused when the runners stack together. Four holes in the base of the stirrup also enable the TRA08 rearfold accessory to be retro-fitted. A flat 'keeper' bar is also positioned just clear of the underside track running rails to ensure that the wheeled carrier remains upright and cannot be dislodged. The 'keeper' bar also allows runners to be added or removed from any point on the track which is a feature theatre tracks often require.

The overall width of the 2 wheeled runner is 40mm and comes in a matt black finish.TRA06TRA06 2-WHEELED RUNNER
<p>The TRA06C four wheeled carrier or trolley is used on curved tracks to attach and support a curtain or scenic cloth. They are usually spaced at 300mm centres along the top of the curtain or cloth and each is capable of supporting a safe working load of 25Kg. Four flanged ball raced polyurethane tyred wheels are attached to the body of the carrier which is moulded from a metal replacement polymer. Curtain hooks are attached to the runner body via a built-in swivelling loop and rubber strips form resilient impact buffers to reduce the noise caused when the runners stack together. Four holes in the base of the stirrup also enable the TRA08 rearfold accessory to be retro-fitted. The overall width of the 4 wheeled runner is 40mm and comes in a matt black finish. please not that the 4 wheeled carrier can only be aded and removed from track ends.</p>
TRA06CTRA06C 4-WHEELED RUNNER
The rearfold carrier is a TRA06 twin wheeled carrier fitted with a TRA08 accessory and comes pre assembled. The addition of the rearfold tag causes the curtain or cloth to travel flat instead of bunched as it moves offstage. An image or a pattern on the curtain or cloth can therefore remain visible as it disappears offstage (See our cording diagrams for information on cording this effect). Please note that rearfold only works on straight track systems. 

The carriers are usually spaced at 300mm centres along the top of the curtain or cloth and each is capable of supporting a safe working load of 25Kg.Two flanged ball raced polyurethane wheels are attached to the body of the carrier which is moulded from a metal replacement polymer. Curtain hooks are attached to the runner body via a built-in swivelling loop and rubber strips form resilient impact buffers to reduce the noise caused when the runners stack together. Four holes in the base of the stirrup also enable the TRA08 rearfold accessory to be retro-fitted. A flat 'keeper' bar is also positioned just clear of the underside track running rails to ensure that the wheeled carrier remains upright and cannot be dislodged. The 'keeper' bar also allows runners to be added or removed from any point on the track which is a feature theatre tracks often require.

The overall width of the 2 wheeled runner is 40mm and comes in a matt black finish.TRA06RTRA06R REARFOLD RUNNER 2 WHEELED
The TRA07 Master Runner is used for the leading edge of curtains and clamps the cord onto the corded systems. Each Master Runner is capable of supporting a safe working load of 50Kg.

Four pairs of ball raced polyurethane wheels are fastened to a wide 'U' shaped metal body with two metal eye loops placed 55mm apart. The loops are used for attaching the leading edge of the curtain to the master runner. 

The upper wheel pairs roll along the top of the running rails of the track and the lower pairs are in close engagement with the underside of the running rails to ensure stability and support. A cord clamping strip is positioned centrally between the eye loops and inside the stirrup, fastened by two 8mm bolts. Three further holes are located on the vertical centre line of each side of the body for attaching other accessories. The overall width of the Master Runner is 96mm and comes in a matt black finish.TRA07TRA07 MASTER RUNNER
The TRA07A Overlap Arms are normally used in pairs fitted to master runners located on opposite sides of the track. This creates a curtain overlap on a single track. The overlap arm is laser profiled and attaches to one side of the Master Runner with two M6 bolts and Nyloc nuts. The curtain attaches to the holes in the plate and provides an overlap of 50cm. The overall length of the arm is 400mm and comes finished in matt black.
 TRA07ATRA07A OVERLAP ARM
The rearfold tag can be added to either a TRA06 two wheeled or a TRA06C four wheeled runner. It is attached with four screws that are supplied with the tag. Adding this accessory causes the curtain or cloth to travel flat instead of bunched. This means an image or a pattern on the curtain or cloth remains visible as it disappears offstage. Please refer to our cording diagrams for information on how to cord this effect. Please note that rearfold only works on straight track systems. TRA08TRA08 REARFOLD TAG - BOLT ON ACCESSORY (BLACK)
The TRA11 foot stirrup (finished in black) is a floor level mounted return pulley designed for use on a flown or movable corded track system. The stirrup at the base is designed to be used by placing a foot into it and pressing down to the floor surface to tension the operating cord. Alternatively 2 holes are provided in the base strap so that the stirrup can be screwed to the stage floor. The overall dimensions of the TRA11 Foot Stirrup Pulley are 300mm high x 150mm wide at the base with a 25mm wide strap. TRA11TRA11 FOOT STIRRUP
The TRA12 is a floor mounted return pulley designed for use on fixed position track systems. It is intended to be crewed to the floor where the cord is tensioned by adjusting the height of the pulley within vertical slots located in the side plates of the bracket. This can be easily altered through the use of thumb screws allowing quick adjustments to be made. The overall dimensions of the Adjustable Floor Pulley are 300m high x 90mm wide x 75mm at base.TRA12TRA12 ADJUSTABLE FLOOR PULLEY
The TRA13 girder clamp provides a suspension point from the flanges of an 'I' beam track. It comprises of a length of Unistrut and two square 'U' bolts each attached to cranked rectangular clamp plates. Any flange width or thickness from a rolled steel joist beam can be accommodated. The suspension is achieved using a TRA 18 Studding Set.

Safe Working Load data for this product is available on request.
 TRA13TRA13 GIRDER CLAMP
The TRA16 Wall Bracket is used to attach a track to a wall or vertical surface. It comprises of a 'L' shaped bracket formed from a flat steel plate and two laser profiled side arms. The side arms are spaced 13mm apart to allow studding or threaded rod to attach into the top channel for any of our track systems. This component has been tested to a 100Kg Safe Working Load at a reach of 200mm.
 TRA16TRA16 WALL BRACKET SET
Cord / Handline, 8 Plait, 8mm diameter prestretched matt black polyester cord used to operate all Triple E track systems, manual and motorised. Triple E rope has a red fleck in it and is the only rope we guarantee to work with our systems and rearfold components.TRA27TRA27 8mm BLACK POLYESTER CORD PER METRE
5mm cotton covered wire rope for use on track systems with Triple E motors where a heavy duty cycle is planned. Please note that rearfold carriers must be ordered with a smaller diameter hole if using TRA27W.TRA27WTRA27W 5mm COTTON COVERED 2.5mm WIRE ROPE PER METRE
The TRA28A is similar to the TRA07s Master Runner but without the two metal eye loops. Instead a centrally placed 13mm hole is provided in the base of the carrier stirrup to accept an M12 stud bolt. This component is mainly used in conjunction with the Scenery carrier bottom TRA28B. The carrier has a Safe Working Load of 50Kg and is finished in matt black.
TRA28ATRA28A SCENERY CARRIER TOP ONLY
This heavy Duty Scenery Carrier has a robust 'U' shaped body. Stiffening webs at each end of the body provide more space to accommodate for four extra side wheels as the main top and bottom wheels are not flanged. The carrier is designed to carry heavy items on both straight and curved track systems and can be used in conjunction with the TRA28B scenery carrier bottom. All twelve ball race wheels are bolted to the bodywork of the carrier for extra strength.

The TRA28AHD has a safe working load of 100Kg.TRA28AHDTRA28AHD SCENERY CARRIER, HEAVY DUTY, TOP ONLY
This component can be retro fitted to a TRA07 and a TRA28A master or Scenery carrier  to enable the carriers on a curved track to be cord operated. The arm is designed to bolt to the holes on either the side of the scenery carrier. The vertical part of the arm carries a rope clamp positioned  to divert the cord from both directions up to the clamp. The arm is designed to position the clamped rope on the cord line and permit it to pass between TRA and UBM19 capstan pulleys. TRA28ARMTRA28ARM SCENERY CARRIER ARM, CURVED TRACK
This component can be retro fitted to TRA 28A,TRA 28AHD and UBM28A for full scenery carrying capacity and caters for scenery of varying thickness from 6mm to 44mm.The fitting comprises two rectangular flat steel plates 80 wide x 96 high drilled with seven holes. Four of the holes are on an angled square pattern are countersunk for wood screw fixings into the scenery, a centre hole is for a security bolt fixing through both plates and the scenery, and the top two holes are for the suspension bolts and spacer bushes attaching the lower pair of plates to a heavy profiled plate. This plate is 80mm wide x 50mm high and has a 40mm wide x 20mm cut out in the top edge with welded tubular bushes either side set horizontally to accept an M8 bolt. This pivot bolt also passes through the sides of a small formed 40 x 40 channel yoke and in the top of this inverted 'U' is a 13mm diameter hole through which an M12 stud bolt is secured. When fitted to a Scenery Carrier  0 to 33mm of vertical adjustment of the suspended scenery is possible. The design permits the suspended scenery to pivot across the line of the track and to lie flat on stage and be raised into the vertical position for ease of rigging.TRA28BTRA28B SCENERY CARRIER BOTTOM ONLY
This component can be retro fitted to a TRA 28AHD Heavy Duty Scenery Carrier to enable the scenery Carriers on a curved track to be cord operated.The arm is designed to bolt to the holes on either the side of the scenery carrier. The vertical part of the arms carries two cord clamps, one on the outer side of each arm. The two arms are connected by a plate which serves to divert the cord from both directions up to the individual cord clamps. The arms are designed to position this plate on the cord line and permit it to pass between TRA and UBM19 capstan pulleys. TRA28HDARMTRA28HDARM SCENERY CARRIER ARM HEAVY DUTY
<p class="MsoNormal" style="text-align:justify">The 0.4kW, 50 Hz TRACDRIVE motor system has been designed to be a bolt-on extra and provides a simple solution for the location of the track motor drive unit. The TRACDRIVE mounts directly beneath a track system or it can be wall mounted with additional brackets. It is capable of driving most straight or curved system layouts in lengths of up to 25m and will operate curtains (including the rearfold system) weighing up to 300kg. The motor unit uses TRA27 pre-stretched polyester cord making the system extremely silent and comes supplied with track mounted limit switches without control. The motor can be wired in either Star 415 volts ac or Delta 240 volts ac and the housing incorporates a junction box which will accept all relevant motor connections. The method of termination to the junction box is hard wired via cable glands.</p>TRADB1TRADB1 TRACDRIVE for UniBeam
<p class="MsoNormal" style="text-align:justify"> The UBM01 Unibeam track is an aluminium
alloy extrusion, 100mm deep x 50mm wide. Lipped grooves located in the top and
bottom of the track are joined by a thin vertical web and are designed to accept standard Unistrut channel nuts. These track section are available in lengths of up to 6.1m (20 feet). 

The UBM01 Unibeam track system has the same external dimensions as Unitrack. The running gear components are therefore also compatible with both systems.</p>UBM01UBM01 STRAIGHT TRACK PER METRE
<p class="MsoNormal" style="text-align:justify">Curved Unibeam track lengths can be rolled to any required radius (min 2m (6'6"))and to a maximum length of 5.5m (18').</p>UBM01CUBM01C CURVED UNIBEAM TRACK PER METRE
Standard curved Unibeam track section, 2m (6'6")radius x 90 degrees.UBM01C20-90UBM01C20/90 CURVED TRACK PER METRE (2M)
<p class="MsoNormal" style="text-align:justify">Standard curved Unibeam section, 3m radius x 90 degrees. This track is constructed from two 45 degree track sections each 2.35M long.</p>UBM01C30-90UBM01C30/90 CURVED TRACK PER METRE (3M)
<p class="MsoNormal" style="text-align:justify">The UBM05 bright zinc plated joint set is used to connect two adjoining sections of track together. It comprises of two clamp plates designed to have a close fit inside the width of the channel groves. Four 10mm set screws (located in each plate) lock the two separate track sections together.</p>UBM05UBM05 JOINT SETS
<p class="MsoNormal" style="text-align:justify">The UBM09 Head Pulley is used on straight track systems to divert the cord down to the floor. The assembly comprises of two separate 90mm diameter Nylon sheaves each mounted within their own metal brackets and bolted to a square base plate. The distance between the two head pulley sheaves is 80mm to ensure correct alignment with overlapped track centres.</p>UBM09UBM09 HEAD PULLEY
<p class="MsoNormal" style="text-align:justify">The UBM10 is located on the track end opposite to the UBM09 Head Pulley and diverts the cord back along the track system. The assembly is fitted to the underside of the track with two M12 bolts and Unistrut channel nuts.</p>UBM10UBM10 RETURN PULLEY
<p class="MsoNormal" style="text-align:justify">The UBM14 Hook Clamp is used to attach Unibeam to tube or truss ranging in diameters from 48mm to 51mm. This component has been tested to a 200Kg Safe Working Load.</p>UBM14UBM14 HOOK CLAMP FOR 48-51mm TUBE/TRUSS
UBM15Deadline fixing
<p class="MsoNormal" style="text-align:justify">The UBM17 Offset Plates are used in conjunction with our UBM14 hook clamps when an overlap track is suspended from a single pipe or tube. They ensure that the track hangs centrally to the tube. The offset plate attach into the track with m12 bolts and Unistrut channel nuts is offset by 40mm for attachment to the hook clamp.</p>
UBM17UBM17 OFFSET PLATE
<p class="MsoNormal" style="text-align:justify">150mm x M12 studding is supplied with four nuts and washers including a Unistrut nut. Longer lengths of studding are available on request and can be used with our TRA13 Girder Clamp and TRA16 Wall Bracket Set.</p>UBM18UBM18 M12 x 150mm studding
<p class="MsoNormal" style="text-align:justify">The UBM19 guides the operating cord around the top of a track system. On curved track sections the curve cord guide should be positioned at every 500mm centres and on straight sections every 2m apart. 3 black plastic ball raced capstan pulleys, each 40mm in diameter, are mounted on a 40mm wide metal plate which holds an M12 bolt captive for fixing either to our Unitrack or Unibeam track systems.</p>UBM19UBM19 CURVE CORD GUIDE SET
<p class="MsoNormal" style="text-align:justify">The UBM21 diverts the operating cords either upwards to a motor or downwards to a floor pulley and locates on the extreme end of a Unibeam track section. Three in-line black plastic ball raced capstan pulleys, 40mm in diameter, are mounted on a base plate which is secured across the cruciform. Cord 'keeps' also trap the cord in the groove of the sheaves. The UBM21 projects 94mm beyond the end of the track and is 224mm long overall.</p>
UBM21UBM21 CURVE HEAD PULLEY SET
<p class="MsoNormal" style="text-align:justify">The UBM22 diverts the operating cord above a curved track back towards the head pulley. A 90mm diameter black Nylon sheave and two 40mm diameter black plastic ball raced capstan sheaves are mounted on a steel base plate which has two 13mm diameter attachment holes. These enable the fitting to be fastened to the top of the track using M12 bolts and Unistrut channel nuts. The overall length of the UBM22 is 200mm.</p>UBM22UBM22 CURVE RETURN PULLEY SET
<p class="MsoNormal" style="text-align:justify">The UBM23 is designed to be used with other suspension components such as the TRA13, TRA14, TRA15, TRA16, and TRA18. The bracket works as an offset plate on overlapping curved tracks and is suspended from a single tube or pipe. Two 80mm square steel plates spaced apart by a short round steel section provide a 90mm clearance from the top of the track and suspension fittings. Cording components can therefore be installed on top of the track system.</p> UBM23UBM23 CURVE SUSPENSION BRACKET
<p class="MsoNormal" style="text-align:justify">The UBM24 is installed on all track ends to anchor the trailing edge of the curtain. A laser profiled plate with a 90 degree return fold provides a fixing point to the track.</p>UBM24UBM24 ENDSTOP
<p class="MsoNormal" style="text-align:justify">The UBM24S is used for scenery tracks where there is no requirement to anchor the trailing edge of a curtain. Two rectangular black rubber sleeves are also fitted to the flat endstop and act as buffer for the track runners.</p>UBM24SUBM24S FLAT ENDSTOP
<p class="MsoNormal" style="text-align:justify">The UBM25 is designed to be used on the return side of the operating cord for straight centre overlap track systems to prevent the slack line drooping into vision. It is recommended that this fitting is used at every 2.5m centres. The line pickup comprises of a steel 'L' shaped strap with a curved bottom section to contain the operating cord.</p> UBM25UBM25 LINE PICKUP
This component is always used in pairs on both straight and curved tracks to create 80mm track centres and to keep tracks rigid where they overlap.  The fixing is with M12 bolts and Unistrut nuts. The finish is black.UBM26UBM26 OVERLAP CLIP
<div>This Scenery Carrier has a Safe Working Load of 385Kg.The heavy Duty Scenery Carrier has a robust 'U' shaped body with stiffening webs at each end.  There are 8 ball raced unflanged wheels fitted to the carrier, the four main wheels which are polyurethane tyred, run between the top and bottom webs of the Unibeam track and the 4 side wheels keep the carrier lined up with the track centre . The carrier is designed to carry items on both straight and curved track systems in silence. The carrier can be used in conjunction with the scenery carrier bottom TRA28B. All the wheels are bolted to the bodywork of the carrier. The finish is black.</div>UBM28AUBM28A UNIBEAM SCENERY CARRIER TOP ONLY (385kg SWL)
This component is designed  for use on a single track to enable the cording to be kept compact within the track plan. It comprises an inverted 'U' shaped steel strip carrying two 40mm diameter black plastic ball raced capstan pulleys mounted side by side. On the centre line inside the top of stirrup are two 13mm holes  to provide for fixing the fitting to the track with M12 bolts and Unistrut nuts. The metalwork is finished  black.UBM31HUBM31H SINGLE TRACK HEAD PULLEY
This component is designed especially for use on a single track to enable the cording to be kept compact within the track plan. It comprises of a  steel fabrication housing a 40mm diameter black plastic ball raced capstan pulley.  in the base  are two 13mm holes set on the centre  to provide for fixing to the track with M12 bolts and Unistrut nuts. The metalwork is finished black.UBM31RSINGLE TRACK RETURN PULLEY
This component is designed to support the operating cord and prevent sag over long distances. It should be located along the track run at between 2 and 4 metre centres. The 'flipper' stops the cord from falling out of the guide whilst allowing the master or scenery carrier to pass through.The Side Cord Guide comprises an 'L' shaped steel strap which mounts with an M12 bolt and Unistrut nut through a clearance hole in the top. The vertical arm of the mounting carries two 40mm diameter black Nylon ball raced capstan pulleys mounted one above the other. Above the top capstan pulley is a cord keep bush, to trap the cord, and which carries a pivoting plate referred to as a 'flipper' and the lower end of which reaches the centre of the bottom capstan pulley. A close fitting rubber sleeve is fitted on the 'flipper' to reduce noise as it comes into contact with the passage of the master runner. The finish is black.UBM32UBM32 SIDE CORD GUIDE
<p class="MsoNormal" style="text-align:justify">The UBM32HD is identical to a standard UBM32 but larger to accommodate for the wider body of a TRA28AHD or UBM28A scenery carrier. This component is designed to support the operating cord and prevent sag over long distances. It should be located along the track run at every 2m or 4m centres. </p> 

<p class="MsoNormal" style="text-align:justify">The Side Cord Guide comprises of an 'L' shaped steel strap and vertical arm which carries two 40mm diameter black Nylon ball raced capstan pulleys. Above the top capstan pulley is a cord 'keep' bush which traps the cord and carries a pivoting plate referred to as a 'flipper'. The lower end of the flipper reaches the centre of the bottom capstan pulley and stops the cord from falling out of the guide whilst allowing the master or scenery carrier to pass by. A close fitting rubber sleeve is fitted onto the flipper to reduce any contact noise with the master runner.</p>UBM32HDUBM32HD SIDE CORD GUIDE HEAVY DUTY
<p class="MsoNormal" style="text-align:justify">The UBM33 is designed to be used when curtains or scenery need to meet in the centre of a side corded track system. A pair of 'L' shaped steel brackets are fixed to the track via M12 bolts and Unistrut channel nuts. Two 40mm diameter black ball raced capstan pulleys are mounted to the vertical arms of the fittings. Please see side cording diagram 12 for a detailed method of how to correctly rope this component.</p> UBM33UBM33 S/C CENTRE OVERLAP DIVERTER
<p class="MsoNormal" style="text-align:justify">The UBM33HD is identical to a UBM33 but larger to accommodate for the wider body of a TRA28AHD or UBM28A scenery carrier. This component is designed to be used when curtains or scenery need to meet in the centre of a side corded track system.</p>UBM33HDUBM33HD S/C CENTRE OVERLAP DIVERTER HEAVY DUTY
<p class="MsoNormal" style="text-align:justify">Supplied in a set of three, the UBM34 assembly is used to divert the cord to and from a floor pulley or motor on side corded track systems. Two of the required fittings are identical and are designed to be located at the outer ends of the track run (one as a return pulley and the other as a drop pulley). The other fitting has a sheave mounted to the lower section of the bracket and is used for the other drop pulley. The mounting brackets for all three components are formed in an 'L' shape with a vertical arm that carries a 90mm diameter black Nylon ball raced sheave with a solid bush cord keep. These components project 98mm from the centre line of the track and are attached to the Unibeam via M12 bots and Unistrut channel nuts. All metalwork is finished black.</p>UBM34UBM34 S/C HEAD & RETURN PULLEY SET (3 PART)
<p class="MsoNormal" style="text-align:justify">The UBM34HD is identical to the UBM34 but wider to accommodate for the larger body of the TRA28AHD and UBM28A scenery carrier.</p>UBM34HDUBM34HD S/C HEAD & RETURN PULLEY SET (3 PART) HEAVY DUTY
<p class="MsoNormal" style="text-align:justify">The UBM35HD is designed to be retro fitted to the TRA28AHD Scenery Carrier and is used to secure the cord. The component bolts on to an existing M8 hole in the side of the carrier and comprises of two bushes fitted through the underside of the carrier for an M8 Hex head cord clamping bolt.</p>
 UBM35HDUBM35HD S/C ROPE CLAMP FOR UBM 28A
<p class="MsoNormal" style="text-align:justify">The Uniring is designed to suspend curtains and cloths from the bottom slot of the Unibeam. It is moulded as a 45mm outer diameter, 30mm inner diameter ring with a thickness of 15mm. The block part of the fitting is inserted into the slot of the beam and then twisted through 90 degrees to trap it in place. The ring design allows for the component to remain fitted to the curtain or cloth and offers a quick-release facility when rigging or de-rigging of the curtains is required.</p>UNIRINGUNIRING

Support

In the United Kingdom contact
Triple E direct on:
01959 570 333
or by email:
info@3-eee.com

Information

Triple E track has a reputation for simple design, rugged construction and ease of installation. It has been the industry standard since 1984, used across the globe in theatre, opera, musicals, TV studios, cruise ships and recital halls and more. Triple E is the first choice for new builds. For a robust, silent, reliable system choose Triple E.

Like Triple E on Facebook

Tweets by @TripleETracks